Birla Opus Style Power Fit Exterior Emulsion Paint

Style Power Fit Exterior Emulsion


₹ 2600 0% off
₹ 0

Birla Opus Style Power Fit exterior emulsion is a durable, high-performance paint formulated to protect and beautify exterior walls of homes and commercial buildings. Ideal for homeowners, contractors and builders, it offers reliable weather resistance, smooth coverage and long-lasting colour retention on properly prepared surfaces. Its advanced formulation helps fight peeling, flaking, fungal growth and fading, even in tough Indian climatic conditions with strong sun and rain. Easy to apply and quick-drying, it is suitable for cement plaster, concrete and masonry substrates. Whether you’re repainting an old building or finishing a new home at 1 126 PARAMATHIMAIN ROADVALLIPURAM NALLIPALAYAM NAMAKKAL TAMIL NADU 637003, this emulsion provides an attractive, cost-effective finish that stays fresh for many years.

Long-lasting colour with enhanced fade resistance
Weather-protective film for harsh sun and rain
Smooth, clean finish for modern-looking exteriors
Good coverage helps reduce overall paint consumption
Resists peeling and flaking on prepared surfaces
Easy to apply with brush, roller or spray

Clean the surface thoroughly to remove dust, loose paint, algae and grease. Repair cracks and allow to dry. Apply one coat of suitable exterior primer and let it cure. Dilute Birla Opus Style Power Fit as recommended with clean water. Apply 2–3 coats by brush, roller or spray, keeping adequate drying time between coats.

Birla Opus Style Power Fit exterior emulsion is used for painting and protecting outer walls of homes and buildings. It provides a smooth finish, long-lasting colour and weather resistance. Suitable for cement plaster, concrete and masonry, it helps exteriors look fresh and vibrant for years with minimal maintenance.

Yes, Birla Opus Style Power Fit exterior emulsion is formulated for Indian weather. It offers strong resistance against sunlight, rain and humidity, helping to prevent fading, peeling and flaking. This makes it a reliable choice for coastal, dry or moderately humid regions, keeping exterior walls protected and attractive longer.

For best results with Birla Opus Style Power Fit exterior emulsion, apply one coat of suitable exterior primer followed by 2–3 coats of paint. The exact number depends on surface condition, colour change and desired finish. Always allow proper drying time between coats to ensure strong adhesion and durability.

Birla Opus Style Power Fit exterior emulsion can be applied on properly cured and prepared cement plaster, concrete, brick masonry and previously painted exterior surfaces that are sound. The surface should be clean, dry, free from dust, algae and loose material to ensure good adhesion, coverage and long-term performance.

Using a suitable exterior primer before applying Birla Opus Style Power Fit is strongly recommended. Primer improves adhesion, seals porosity and enhances coverage, especially on new or highly absorbent surfaces. It also helps the exterior emulsion deliver better colour uniformity, durability and overall protection against weather over time.